先贴上程序：

bool SERCOM6_SPI_WriteRead (void* pTransmitData, size_t txSize, void* pReceiveData, size_t rxSize)
{
    bool isRequestAccepted = false;
    uint32_t dummyData = 0U;

    /* Verify the request */
    if((((txSize > 0U) && (pTransmitData != NULL)) || ((rxSize > 0U) && (pReceiveData != NULL))) && (sercom6SPIObj.transferIsBusy == false))
    {
        if((SERCOM6_REGS->SPIM.SERCOM_CTRLB & SERCOM_SPIM_CTRLB_CHSIZE_Msk) == (uint32_t)SPI_DATA_BITS_9)
        {
            /* For 9-bit transmission, the txSize and rxSize must be an even number. */
            if(((txSize > 0U) && ((txSize & 0x01U) != 0U)) || ((rxSize > 0U) && ((rxSize & 0x01U) != 0U)))
            {
                return isRequestAccepted;
            }
        }

        isRequestAccepted = true;
        sercom6SPIObj.txBuffer = pTransmitData;
        sercom6SPIObj.rxBuffer = pReceiveData;
        sercom6SPIObj.rxCount = 0U;
        sercom6SPIObj.txCount = 0U;
        sercom6SPIObj.dummySize = 0U;

        if(pTransmitData != NULL)
        {
            sercom6SPIObj.txSize = txSize;
        }
        else
        {
            sercom6SPIObj.txSize = 0U;
        }

        if(pReceiveData != NULL)
        {
            sercom6SPIObj.rxSize = rxSize;
        }
        else
        {
            sercom6SPIObj.rxSize = 0U;
        }

        sercom6SPIObj.transferIsBusy = true;

        /* Flush out any unread data in SPI read buffer */
        while((SERCOM6_REGS->SPIM.SERCOM_INTFLAG & SERCOM_SPIM_INTFLAG_RXC_Msk) == SERCOM_SPIM_INTFLAG_RXC_Msk)
        {
            dummyData = SERCOM6_REGS->SPIM.SERCOM_DATA;
            (void)dummyData;
        }

        SERCOM6_REGS->SPIM.SERCOM_STATUS |= SERCOM_SPIM_STATUS_BUFOVF_Msk;

        SERCOM6_REGS->SPIM.SERCOM_INTFLAG |= (uint8_t)SERCOM_SPIM_INTFLAG_ERROR_Msk;

        if(sercom6SPIObj.rxSize > sercom6SPIObj.txSize)
        {
            sercom6SPIObj.dummySize = sercom6SPIObj.rxSize - sercom6SPIObj.txSize;
        }

        /* Start the first write here itself, rest will happen in ISR context */
        if((SERCOM6_REGS->SPIM.SERCOM_CTRLB & SERCOM_SPIM_CTRLB_CHSIZE_Msk) == (uint32_t)SPI_DATA_BITS_8)
        {
            if(sercom6SPIObj.txCount < sercom6SPIObj.txSize)
            {
                SERCOM6_REGS->SPIM.SERCOM_DATA = *((uint8_t*)sercom6SPIObj.txBuffer);

                sercom6SPIObj.txCount++;
            }
            else if(sercom6SPIObj.dummySize > 0U)
            {
                SERCOM6_REGS->SPIM.SERCOM_DATA = 0xFFU;

                sercom6SPIObj.dummySize--;
            }
            else
            {
                /* Do nothing */
            }
        }
        else
        {
            sercom6SPIObj.txSize >>= 1U;
            sercom6SPIObj.dummySize >>= 1U;
            sercom6SPIObj.rxSize >>= 1U;

            if(sercom6SPIObj.txCount < sercom6SPIObj.txSize)
            {
                SERCOM6_REGS->SPIM.SERCOM_DATA = *((uint16_t*)sercom6SPIObj.txBuffer) & SERCOM_SPIM_DATA_Msk;

                sercom6SPIObj.txCount++;
            }
            else if(sercom6SPIObj.dummySize > 0U)
            {
                SERCOM6_REGS->SPIM.SERCOM_DATA = 0xFFFFU & SERCOM_SPIM_DATA_Msk;

                sercom6SPIObj.dummySize--;
            }
            else
            {
                /* Do nothing */
            }
        }

        if(rxSize > 0U)
        {
            /* Enable ReceiveComplete  */
            SERCOM6_REGS->SPIM.SERCOM_INTENSET = (uint8_t)SERCOM_SPIM_INTENSET_RXC_Msk;
        }
        else
        {
            /* Enable the DataRegisterEmpty  */
            SERCOM6_REGS->SPIM.SERCOM_INTENSET = (uint8_t)SERCOM_SPIM_INTENSET_DRE_Msk;
        }
    }

    return isRequestAccepted;
}



bool SERCOM6_SPI_Write(void* pTransmitData, size_t txSize)
{
    return SERCOM6_SPI_WriteRead(pTransmitData, txSize, NULL, 0U);
}

bool SERCOM6_SPI_Read(void* pReceiveData, size_t rxSize)
{
    return SERCOM6_SPI_WriteRead(NULL, 0U, pReceiveData, rxSize);
}



void SPI1_Send_Byte(unsigned char dat)
{   
   
}

我想在SPI1_Send_Byte函数里调用SERCOM6_SPI_Write函数，可是SERCOM6_SPI_Write函数的参数是void*类型，那么

我这样写行不行呢？我感觉有点不对。

void* pTransmitData;
    pTransmitData=(void *)(dat);
    SERCOM6_SPI_Write(pTransmitData, 1);

高手指教，谢谢！